Sichuan Crane factory analysis of jib crane safety operation code

Category： Industry Dynamics

Release time：2023-04-26

Sichuan Crane Factory produces slewing boom crane, also known as slewing boom crane (cantilever crane), mainly divided into fixed column slewing boom crane, wall slewing boom crane, row slewing boom crane and mobile slewing boom crane. Because of its small occupation space, flexible and convenient operation, it is widely used in workshop, warehouse production lifting operations. Therefore, it is particularly important to understand and be familiar with the safety operation standard of rotary jib crane.

1, the operator of the cantilever crane should be used before the switch button and wire rope limit check there is no fault, if there is a problem, to repair the rear can be used in time, with the power switch must be turned off, before you can leave.

2, in the lifting of the workpiece to concentrate, hands on the operation switch, in order to brake at any time, not while lifting side chat, eat, so as to avoid danger.

3. When lifting any workpiece, be sure to try to lift it. The hook should be vertical, and the hook should be adjusted in time when the imbalance is found.

4, no overload lifting, lifting any workpiece is not allowed to exceed 500kg, otherwise it will be punished according to the violation of the operation rules.

5. When lifting the workpiece, it is not allowed to be too high from the ground. It should be about half the height of a person.

6, when lifting any workpiece, should always pay attention to the operation condition, abnormal sound and abnormal phenomenon, immediately stop the lifting, timely report for treatment, such as sick operation, will be in violation of the operating rules of heavy punishment.

7, the cantilever crane in use is strictly prohibited all surprise repair.

8. When not in use, the rotary arm crane should be placed in a safe place. It is not allowed to obstruct the operation route of other lifting equipment, nor is it allowed to park at will, otherwise it will be punished according to the violation of the operation rules.

Analysis of safe operation code for rotary boom crane in Sichuan Crane Factory. Some content from the Internet, content for reference only.

keyword： Sichuan Crane factory analysis of jib crane safety operation code

Previous： Sichuan crane factory interpretation crane overload protection device

Next： The advantage comparison between European crane and traditional crane

RELATED NEWS